Search This Blog

Monday, September 1, 2014

Apply Network Settings in a task sequence - Part 4

Links: Part 1Part 2Part 3Part 4

OSDAdapter0EnableWINS

Set this to True to use WINS for name resolution.

Task Sequence example:

OSDAdapter0EnableWINS=True

image

OSDAdapter0WINSServerList

Comma-delimited list of WINS server IP addresses. This property is ignored unless EnableWINS is set to True.
Result in Windows:

image

Task Sequence example:

OSDAdapter0WINSServerList=10.10.10.1,10.10.10.2

image

OSDAdapter0TcpipNetbiosOptions

Options for NetBIOS over TCP/IP. Possible values are:

  • 0 Use NetBIOS settings from DHCP server (Default).
  • 1 Enable NetBIOS over TCP/IP.
  • 2 Disable NetBIOS over TCP/IP.

Result in Windows:

image

Task Sequence example:

OSDAdapter0TcpipNetbiosOptions=2

image

OSDAdapter0Name

Name of the network connection as it appears in the network connections control panel program. The name is between 0 and 255 characters in length.

Result in Windows:

image

Task Sequence example:

OSDAdapter0Name=Test

image

OSDDNSDomain

Specifies the primary DNS suffix used by the destination computer

Result in Windows:

image

Task Sequence example:

OSDDNSDomain=gt.local

image

OSDAdapter0MacAddress

Media access controller (MAC) address used to match settings to physical network adapter. If used you must specify MAC address on all interfaces.

With this setting you make sure that your setting for example for OSDAdapter0 is applied to a specific adapter.

Task Sequence example:

OSDAdapter0MacAddress=00:50:56:34:FB:23

image

No comments:

Post a Comment