MDT

Windows and Office deployment lab kit

Introduction Microsoft just introduced an updated kit for IT pros to plan, test and validate deployment and management of desktops running Windows 10 Enterprise and Microsoft 365 Apps for enterprise. This was earlier known as “Windows insider lab for Enterprise” or “Olympia”.   The lab will cover technologies: Microsoft Endpoint

Continue to read »

Step by step Autopilot scenarios

Last updated 14.08.2020 Introduction I have written the following blog to share some of the valuable sources of information I have discovered while developing my knowledge related to the rollout of Modern Workplace clients using Microsoft365 Intune and Autopilot. Instead of a standard how to guide I have decided to

Continue to read »

MDT 2013 Update 1 re-released (build 8298)

It is no secret that MDT 2013 Update 1 had more than one problem: MDT 2013 Update 1 Release Notes and Known Issues Microsoft has now updated MDT 2013 Update 1 to build 8298 and fixed some of the problem but as you can read here there are still known

Continue to read »

Apply Network Settings in a task sequence – Part 4

Links: Part 1,  Part 2,  Part 3,  Part 4 OSDAdapter0EnableWINS Set this to True to use WINS for name resolution. Task Sequence example: OSDAdapter0EnableWINS=True OSDAdapter0WINSServerList Comma-delimited list of WINS server IP addresses. This property is ignored unless EnableWINS is set to True. Result in Windows: Task Sequence example: OSDAdapter0WINSServerList=10.10.10.1,10.10.10.2 OSDAdapter0TcpipNetbiosOptions

Continue to read »

Apply Network Settings in a task sequence – Part 3

Links: Part 1,  Part 2,  Part 3,  Part 4 OSDAdapter0DNSServerList Comma-delimited list of DNS servers for the adapter. Result in Windows: Task Sequence example: OSDAdapter0DNSServerList=10.10.10.1,10.10.10.2 OSDAdapter0DNSDomain Domain Name System (DNS) domain for the adapter. Result in Windows: Task Sequence example: OSDAdapter0DNSDomain=gt.local OSDAdapter0EnableFullDNSRegistration Set to True to register the IP address

Continue to read »

Apply Network Settings in a task sequence – Part 2

Links: Part 1,  Part 2,  Part 3,  Part 4 OSDAdapter0EnableDHCP Set this to True to enable Dynamic Host Configuration Protocol (DHCP) for the adapter (obtain an IP address automatically). Setting it to False will disable DHCP (Use the following IP address). Result in Windows: Task Sequence example: OSDAdapter0EnableDHCP=False OSDAdapter0IPAddressList Comma-delimited

Continue to read »

Setting environment system variables in a task sequence

One way to set a environment system variable during a MDT or SCCM Task Sequence is to use the SETX command. http://technet.microsoft.com/en-us/library/cc755104(v=ws.10).aspx This command SETX LLVAR TEST /M will set the variable LLVAR to the value TEST If we take a closer look at the System variables after this step,

Continue to read »
Search blog posts
Authors
Modern Workplace consultant and a Microsoft MVP in Enterprise Mobility.
Modern Workplace consultant and a Microsoft MVP in Windows and Devices for IT.

Infrastructure architect with focus on Windows Client management & security.

Cloud & security specialist with focus on Microsoft backend products and cloud technologies.

Infrastructure architect with focus on design, implementation, migration and consolidation.

Infrastructure consultant with focus on cloud solutions in Office365 and Azure.

follow us in feedly
Categories

Follow on SoMe